- Stainless Steel Expansion Sleeve Bolt for Concrete and Brick
- 2017-12-30 01:25
- Sleeve anchors are the most versatile masonry expansion anchors because they can be used in a variety of base materials, including concrete, brick, and block. our productive factory is able to produce CE certification stainless steel sleeve anchors at bot
- Stainless Steel Coil Tubing
- 2017-12-20 21:34
- STAINLESS STEEL\304,304L, 316, 316L, 2B, 409 1D, 2B and 2D 420 2B, 430 2R, ASTM A240/A240M, EN 10088-2, (Multiply weights below by 1.0110)
- Hot Dipped Galvanized Anchor Bolt
- 2017-12-16 21:18
- Features: U-BOLT, J-BOLT, EYE SCREW, EYEBOLT, HOOK BOLT1) Standard: DIN, ANSI, JIS, BS and non-standard 2) Finish: Zinc plated, nickel plated, hot dipped galvanized, black
- Heavy Hex Jam Nuts
- 2017-12-01 16:27
- Hex jam nuts are thinner than a standard hex nut but have the same dimension across the flats and corners. Hex jam nuts have two common applications:jam nut can be threaded onto a bolt and run tight a
- Stainless Steel Flat Washers
- 2017-10-15 13:52
- flat Washers provide a smooth bearing surface and are used under the head of a bolt and / or a nut. Flat washers are covered under DIN125 These washers are unhardened and intended for general use.
- square head lag bolts
- 2017-09-20 13:40
- Square head lag bolts offer a large bearing area for positive gripping with an open or adjustable wrench. Length is measured from under the head. Head width or wrench size is measured across the flats. Plain finish, or bare metal, may or may not have a co
- 316 Stainless Steel Pipe
- 2017-09-18 01:38
- High grade seamless stainless steel tubes and pipes are becoming increasingly important. Higher quality requirements for materials and components in almost all industries help create new areas of appl
- ASTM 304 304L 316 316L SS stainless steel mig wire rope
- 2017-09-15 03:58
- 1) Grade: 201, 202, 301, 303, 304, 304L, 305, 316, 316L, 321, 410, 416, 420, 430, 1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597, 1.45412) Standard: ASTM, EN, DIN, JIS3) Diameter: 0.05-20mm4) Surface: bright, cloudy, plain, black5) Type: spring, welded, t
- Slotted Nuts
- 2017-09-01 22:52
- Slotted nuts are hex nuts with six large slots 60° apart in the top center of each flat side. Their strength is said to be 80% of "full thickness nuts of the same size, style and grade." Slotted nuts
- Socket Cap Screws
- 2017-08-15 03:07
- Set Screws are available in alloy steel with a black oxide finish and stainless steel. we carries over 300 variations in the following styles: Cup Point; Flat Point; Cone Point; Half Dog Point; and Ov
- Flange Nuts and Bolts
- 2017-08-15 00:48
- Flange nuts are hex nuts with a bottom circular flange that is larger than their top hex section. There are two types commonly available: flange lock nuts, which are prevailing torque type lock nuts,
- Stainless Steel Threaded Bent J-bolts
- 2017-08-11 09:16
- J-shaped bolt that can be used in a variety of applications and are made from several different materials. They are most commonly used to suspend electrical wiring and sheet metal from wooden structur
- Stainless Steel Pipe
- 2017-08-03 09:05
- STAINLESS STEEL304, 304L, 316, 316L,316TI, EN 10088-1&2, EN 10217-7, EN 10028-1&7 ( Multiply weights by1.0100)
