- Zig-zag element for fan heater with axial fan
- 2017-12-30 03:08
-
Model Number: MCC-125-2000W
Brand Name: OEM
Key Specifications/Special Features:
Zig-zag element for fan heater with axial fanParameters:Voltage: 220 to240VPower: 1600WDetails:Heaters adopts mica as framework and insulating adopts mica as fram...
- Ceramic Electrical Water Heating Element for Solar Water Heater
- 2017-11-03 11:44
-
Model Number: MZFR-H-3000W
Key Specifications/Special Features:
Ceramic heating element for solater water heaterSize: 47mmVoltage: 220V 50/60 HzPower: 1500WInsulation electric strength: 2,500V, 50Hz at room temperature, no punch-through in one...
- PTC heater for warmer heaters
- 2017-10-24 00:36
-
Model Number: MZFR-F-225L88W-2000W
Key Specifications/Special Features:
Ceramic PTC heater (insulated surface) for room heater are widely used bathroom ceiling heater and warmer heater-220V 2000W-Size: 225mmx88mm-Surface temperature: TS250 deg...
- Ceramic heating board for medical equipment temperature controller
- 2017-09-26 08:19
-
Model Number: MKMH-03
Key Specifications/Special Features:
Resistance: 150（Ω） Max. Voltage 220V（V）Thickness: 1.0mmMedical appliance temperature controller Size:180W 136*30*1.0mm AC 220V400W 350*40*1.2mm AC 220VSubstrate material: 96% AL2O3 cera...
- Heating element welder plastic bags machines
- 2017-09-11 11:51
-
Model Number: MKMH-010
Key Specifications/Special Features:
Ceramic heaters are widely used in welder plastic bags machines small heating equipment, medical equipment, health environmental protection equipment, heating, electric heating film hea...
- Ceramic electrical heater for solar electrical water
- 2017-09-05 23:37
-
Model Number: MKNCH-01
Key Specifications/Special Features:
Ceramic electric heater for solar water heaterFeatures:1) Anti-rust. resist on strong acid and alkali2) Low conductive, much safer3) Much smaller 1500W is just 7cm, while traditional ...
- Silicon nitride igniter for water heater
- 2017-09-03 10:51
-
Model Number: MKSNC-021-#2349
Key Specifications/Special Features:
Silicon nitride ceramic heating elements can be used in the water heater, heating faucets, gas oven, thermostatic bath, the steam engineCharacteristics:- Temperature warming up...
- Ceramic heater strip for laser printers
- 2017-07-24 23:07
-
Model Number: MKMH-01
Key Specifications/Special Features:
Ceramic heater strip for laser printerSize: 270*7.82*0.635mm, 270*6*1.0mm, 270*8*0.635mmWorking temp: 100~180 degreeWorking voltage： 220V, 50HzLeakage current: below 2mAStick on the ba...
